Vol 32 No 03 LCGC Europe March 2019 Regular Issue PDF

Article

LCGC Europe

LCGC EuropeLCGC Europe-03-01-2019
Volume 32
Issue 3

Click the title above to open the LCGC Europe March 2019 regular issue, Vol 32, No 03, in an interactive PDF format.

External Link - LCGC Europe March 2019.pdf

Articles in this issue
Equation 1.png
Hydrophilic Interaction Liquid Chromatography: An Update
Equation 11552407833235.png
Looking for New Selectivity in Reversed-Phase Liquid Chromatography? A View of the Selectivity Landscape Over the Past Two Years
figure 1 L.png
Recent Advances in Solid-Phase Microextraction, Part 1: New Tricks for an Old Dog
Vol 32 No 03 LCGC Europe March 2019 Regular Issue PDF
figure 1 L1552484426198.png
Middle-Up Characterization of the Monoclonal Antibody Infliximab by Capillary Zone Electrophoresis–Mass Spectrometry
table 1 L1552489340192.png
Perspectives on the Adoption and Utility of 1.0-mm Internal Diameter Liquid Chromatography Columns
Alejandro.png
The Rising Role of Foodomics
milan_duomo_HD.jpg
The 48th International Symposium on High Performance Liquid Phase Separations and Related Techniques (HPLC 2019)
Screen Shot 2019-03-13 at 15.27.22.png
Hydrophobic Interaction Chromatography (HIC) of Proteins
Figure S1-1.jpg
Supplementary Information: Middle-Up Characterization of the Monoclonal Antibody Infliximab by Capillary Zone Electrophoresis–Mass Spectrometry
Recent Videos
Speaking to Future Analytical Chemists: An Interview with Vilmos Kertesz
Speaking to Future Analytical Chemists: An Interview with Vilmos Kertesz
Honoring Mentors: An Interview with Vilmos Kertesz
Honoring Mentors: An Interview with Vilmos Kertesz
Developing and Commercializing Liquid Extraction Techniques: An Interview with Vilmos Kertesz
Developing and Commercializing Liquid Extraction Techniques: An Interview with Vilmos Kertesz
Reflecting on Research: An Interview with Vilmos Kertesz
Reflecting on Research: An Interview with Vilmos Kertesz
Slalom Chromatography Revisited (Part 2); An Interview with Fabrice Gritti
Slalom Chromatography Revisited (Part 2); An Interview with Fabrice Gritti
Previewing ASMS 2025: An Interview with Vilmos Kertesz
Previewing ASMS 2025: An Interview with Vilmos Kertesz
Slalom Chromatography Revisited (Part 1): An Interview With Fabrice Gritti
Slalom Chromatography Revisited (Part 1): An Interview With Fabrice Gritti
A Message to the Next Generation: An Interview with Michael Shortreed
A Message to the Next Generation: An Interview with Michael Shortreed
Influencing Software and Reflecting on Mentors: An Interview with Michael Shortreed
Influencing Software and Reflecting on Mentors: An Interview with Michael Shortreed
The Path to the Al Yergey MS Scientist Award: An Interview with Michael Shortreed
The Path to the Al Yergey MS Scientist Award: An Interview with Michael Shortreed
Related Content
Best of the Week: Paul Ferguson Specially Appointed a Professor, Studying Cyclodextrins, Characterizing Polyamides

Best of the Week: Paul Ferguson Specially Appointed a Professor, Studying Cyclodextrins, Characterizing Polyamides

Aaron Acevedo
May 9th 2025
Article

Here is some of the most popular content posted on LCGC International this week.

Ep. 35: On the Subject of Continuing Education for Spectroscopists

Ep. 35: On the Subject of Continuing Education for Spectroscopists

April 1st 2025
Podcast
Site Logo

Current Trends in Mass Spectrometry (May 2025)

May 9th 2025
Article

Ep. 34: A Banner Year for Separation Science at Pittcon 2025

Ep. 34: A Banner Year for Separation Science at Pittcon 2025

March 14th 2025
Podcast
Tractor spraying of agricultural lands © Serega - stock.adobe.com

A Novel LC–QTOF-MS DIA Method for Pesticide Quantification and Screening in Agricultural Waters

Kate Jones
May 8th 2025
Article

Scientists from the University of Santiago de Compostela developed a liquid chromatography quadrupole time-of-flight mass spectrometry (LC–QTOF-MS) operated in data-independent acquisition (DIA) mode for pesticide quantification in agriculturally impacted waters.

The 3D printing machine make the 3D prototype model by resin material. The hi-technology for rapid prototype method by 3d printing machine. | Image Credit: © Pixel_B - stock.adobe.com

Investigating 3D-Printable Stationary Phases in Liquid Chromatography

Aaron Acevedo
May 7th 2025
Article

3D printing technology has potential in chromatography, but a major challenge is developing materials with both high porosity and robust mechanical properties. Recently, scientists compared the separation performances of eight different 3D printable stationary phases.