Application Notes: Cannabis

This application note highlights the ability of YMC-Triart C18 to separate 11 common cannabinoids encountered during potency testing.

A loading study for purifying cannabidiol (CBD) from a commercially available “high-CBD” hemp oil extract

This application note is suitable for compliance testing of industrial hemp with the USDA rule for “Establishment of a Domestic Hemp Production Program”.

Isocratic HPLC method for the analysis of mycotoxins and aflatoxins uses the DFL-10 filter fluorescence detector with a photochemical reactor to improve sensitivity.

This application note provides quantitative analysis of δ9-THC from cannabidiol oil using a pyroprobe interfaced to a GC–MS.

Isocratic HPLC method for the analysis of mycotoxins and aflatoxins uses the DFL-10 filter fluorescence detector with a photochemical reactor to improve sensitivity.

Isocratic HPLC method for the analysis of mycotoxins and aflatoxins uses the DFL-10 filter fluorescence detector with a photochemical reactor to improve sensitivity.

We look at the Zebron ZB-624plus, the optimal choice for the analysis of volatile compounds for environmental, pharmaceutical, food, cannabis, and specialty chemicals.

In this application, we look at the determination of residual solvents and terpenes in cannabis by GC–FID using the Zebron™ ZB-624plus™ GC column.

This application note details a loading study for purifying cannabidiol (CBD) from a commercially available “high-CBD” hemp oil extract.

This application note details the development of a HPLC method for analyzing CBD and melatonin.

An HPLC method for the testing of CBD oils. The DLC-10 is a small footprint, easy-to-use and low-cost HPLC system. An isocratic assay offers reliability and ease of use.

This application note demonstrates the performance of Empore SDB-RPS disks in the monitoring of Organophosphorus pesticides in ground water using EPA Method 8141B.

This application note adopted the Full Evaporation Technique (FET) to analyze the solvent residual, based on California Residual Solvents Category, in cannabis oil.

Using Full Evaporation Technique (FET) to analyze the solvent residual (California Residual Solvents Category I and II) in cannabis oil by a CDS dynamic headspace module

Automated QuEChERS clean-up of hemp oil extracts combined with liquid introduction and PTV-GC–MS determination of pesticides leads to improved throughput and low LOQs.

This application note adopted the Full Evaporation Technique (FET) to analyze the solvent residual, based on California Residual Solvents Category, in cannabis oil.

The Rapid Extraction of Pesticides from Cucumber, Tomato, and Green Pepper

This application note demonstrates rapid automated extraction and UPLC analysis of cannabinoids from hemp flower.

Daicel’s CHIRALPAK® IF proven to perform the difficult separations of cannabinoids Δ8-THC and Δ9-THC.

An HPLC method for the testing of CBD oils. The DLC-10 is a small footprint, easy-to-use and low-cost HPLC system. An isocratic assay offers reliability and ease of use.